Wednesday, September 08, 2010
Home

Buy Amsoil-Wholesale

Commercial

Retailers 

Become an Amsoil Dealer

About Us 
Amsoil Synthetic Grease    
High Temp Racing and Waterproof Grease

Series 2000 Synthetic Racing Grease, NLGI #2, GC/LB (GRG)
AMSOIL Series 2000 Synthetic Racing Grease helps protect wheel bearings and chassis from the dangerous, damaging heat created by hot pavement, huge engines and the unceasing friction of intense speed. It is ideal for all high-temperature/high-speed applications.

Load Capacity
AMSOIL Series 2000 Racing Grease is an extreme-pressure multi-purpose grease formulated for high-temperature/high-speed applications. It also provides superior protection for low-speed bearings, a job usually reserved for heavy-duty products. Components get the load bearing capacity of a heavy-duty grease without sacrificing the high-temperature protection of a multi-purpose.

Anti-Wear Performance
AMSOIL Series 2000 Racing Grease is designed to deliver maximum protection in the intense environments found in racing applications. Its high-performance anti-wear additive package helps ensure maximum component life.

All-Temperature Protection
AMSOIL Series 2000 Racing Grease pairs a high Viscosity Index synthetic base oil with a top-quality lithium complex thickener, known for its extraordinary performance in temperature extremes. AMSOIL Series 2000 Racing Grease offers excellent low-temperature pumpability and high-temperature consistency for dependable all-temperature protection.

Oxidation Resistance and Inhibition
AMSOIL Series 2000 Racing Grease offers excellent oxidation resistance and a robust package of oxidation inhibitors, helping to prevent grease breakdown and component surface damage in the high oxidizing conditions associated with high-temperature operation.

Friction Reduction
Because it effectively reduces friction, AMSOIL Series 2000 Racing Grease maximizes power through-put and fuel efficiency. Its superior friction-reduction properties help ensure race vehicles operate at peak performance.

Washout Resistance and Corrosion Inhibition
AMSOIL Series 2000 Racing Grease resists water wash-out and inhibits rust and other forms of corrosion.

Applications
AMSOIL Series 2000 Synthetic Racing Grease meets the highest performance standards of the National Lubricating Grease Institute; GC for wheel bearing applications and LB for chassis applications.

 

Synthetic Water Resistant Lithium Complex Grease (GWR)
Multi-Purpose NLGI #2 GC-LB Extreme Pressure Fortified. Superior lubrication and protection in automotive and industrial applications with extensive exposure to water.

PRODUCT DESCRIPTION
AMSOIL Synthetic Water Resistant Grease (GWR) is an extreme-pressure, multipurpose grease formulated specially for wet-duty performance. Its water washout and sprayoff resistance are ideal for wheel bearings of vehicles and trailers frequently exposed to water, mud, snow or ice. It is also excellent for use in plants, such as paper mills, in which machinery undergoes frequent or prolonged exposure to water.

Water Washout and Sprayoff Protection
AMSOIL Synthetic Water Resistant Grease derives its superior wet-duty performance from its peerless cohesiveness and adhesiveness. It holds together when exposed to water and clings tenaciously to metal surfaces when wet. Components remain protected during prolonged exposure to standing water or exposure to pressurized water.

Rust and Corrosion Protection
AMSOIL Synthetic Water Resistant Lithium Complex Grease protects metal surfaces from rust and corrosion, both of which may be hastened or worsened by frequent or prolonged water contact. It seals metal surfaces against rust and chemically fights corrosion.

High and Low Temperature Performance
AMSOIL Synthetic Water Resistant Grease effectively reduces friction, helping high-speed components run cooler. It resists the damaging effects of high temperatures and oxidation so components stay deposit-free for optimal performance and long life.

AMSOIL Synthetic Water Resistant Grease may be used in place of separate high-temperature and lowtemperature greases.

Load Carrying and Extreme Pressure Performance
AMSOIL Synthetic Water Resistant Lithium Complex Grease protects components from metal-to-metal contact even under heavy loads. Its extreme pressure additives form a shield against sustained or sudden extreme loads for dependable protection against wear.

Service and Shelf Life
AMSOIL Synthetic Water Resistant Grease resists oxidation, high temperature degradation and additive depletion so effectively, it may be used for longer service intervals than conventional greases. AMSOIL Synthetic Water Resistant Grease also resists oil separation and offers a long shelf life.

APPLICATION
AMSOIL Synthetic Water Resistant Grease meets the highest performance standards set by the National Lubrication Grease Institute (NLGI), GC for wheel bearing applications and LB for chassis applications. It may be used in automotive wheel bearings, chassis or other applications for which an NLGI No. 2 GC or LB grease is recommended. Its unique water resistant formulation makes it ideal for use in components or equipment with frequent or prolonged water exposure. AMSOIL Synthetic Water Resistant Grease is compatible with most seal materials and most other greases.


Off-Road Synthetic Grease

Amsoil's New Synthetic Polymeric Off-Road Grease with Maximum Pound-Out Resistance for Extended Service Intervals

                                                 

Amsoil Synthetic Grease

 

PRODUCT DESCRIPTION
AMSOIL Synthetic Polymeric Off-Road Grease (GPOR1, GPOR2) combines an over-based calcium-sulfonate complex thickener and proprietary synthetic polymeric technology to provide outstanding performance in heavy duty off-road applications.

AMSOIL developed an exclusive synthetic polymeric system custom-built to provide performance benefits specific to off-road equipment. This synthetic technology helps give AMSOIL Off-Road Grease tenacious cling ability and maximum pound-out resistance over extended service intervals, even in wet environments.

EXTREME IMPACT RESISTANCE
Greased components in heavy equipment are subjected to serious abuse. Virtually all heavy-duty off-road equipment operates under heavy-load conditions. The extreme impact common to off-road equipment forces all of that heavy load (pressure) onto places where the equipment pivots, relying on the grease to prevent metal-to-metal contact. Lesser quality greases cannot withstand the load and are pounded out of the impact area. When pound-out occurs, heavily loaded components are left unlubricated, which can result in metal-to-metal contact and extreme amounts of wear.

AMSOIL Off-Road Grease’s exclusive synthetic polymeric technology provides exceptional adhesion (ability to cling to components) and cohesion (ability to cling to itself) properties. It is engineered to resist pound-out better than other greases in heavily-loaded, extreme-pressure applications and stay in place longer, providing outstanding lubrication over extended service intervals and reducing the detrimental effects of missed grease points.

5% Moly-Fortified to Meet CAT Requirements
AMSOIL Synthetic Polymeric Off-Road Grease is heavily fortified with moly for maximum wear protection to meet Caterpillar’s requirement for pin and bushing applications. Its high Timken OK load and excellent four-ball wear and four-ball weld test results are proof of its exceptional load-bearing capacity.

Extended Service Life, Excellent Value
AMSOIL Synthetic Polymeric Off-Road Grease provides serious severe-duty performance over extended service intervals. It resists pound-out and significantly reduces the amount of grease ejected during repetitive pounding action. Field test results show that AMSOIL Synthetic Polymeric Off-Road Grease reduces grease consumption by up to 50 percent. That allows operators to either maintain their current maintenance schedule and use up to 50 percent less grease per application, or extend the length of time between re-greasings by up to 50 percent. Its superior pound-out resistance combined with extended service intervals and superior protection result in reduced lubricant, labor and equipment-replacement costs.

Excellent Water Washout Resistance
Greased components on heavy equipment are frequently exposed to water. AMSOIL Synthetic Polymeric Off-Road Grease resists water washout to maintain the external seal on greased components and help prevent water and other contaminants from entering wear-prone areas.

Calcium-Sulfonate Complex Thickener
AMSOIL Synthetic Polymeric Off-Road Grease features a calcium-sulfonate complex thickener for enhanced extreme-pressure performance. Calcium-sulfonate complex is the ideal thickener for off-road grease. Its inherent extreme-pressure benefits deliver excellent impact resistance.

APPLICATIONS
AMSOIL Synthetic Polymeric Off-Road Grease is ideal for heavy-duty, heavy-load-bearing applications operating in the adverse conditions found in agricultural, construction, landscaping, logging and mining environments. Applications include power shovels, drag lines, wheel and track loaders, excavators, bulldozers, skid steers, dump trucks and other heavy-duty equipment with heavily-loaded pivot pins, king pins, bucket pins and bushings. AMSOIL Synthetic Polymeric Off-Road Grease is a perfect choice for Caterpillar equipment requiring 5 percent moly for pin and bushing applications. AMSOIL Off-Road Grease provides superior performance, protection and longevity in heavy-duty, off-road applications.

TYPICAL TECHNICAL PROPERTIES

AMSOIL Synthetic Polymeric Off-Road Grease (NLGI #2)
NLGI Grade

2
Penetration [25°C (77°F), 0.1 mm] worked 60 strokes (ASTM D-217)

265-295
Base Oil Viscosity [40°C (104°F)], cSt (ASTM D-445)
220
Timken OK Load Test, lbs. (ASTM D-2509)

75+
Four Ball Weld Point, kgf (ASTM D-2596)

620+
Four Ball Wear Test, scar mm (ASTM D-2266)

< .45
Dropping Point, °C, (°F) (ASTM D-2265)

345 (650)
Water Washout, % (ASTM D-1264)

1
Ambient Operating Temperature Range, °C, (°F)

-23 to 54 (-10 to 130)
Thickener

Calcium-Sulfonate Complex
Moly Content, %

5
Rust Test (ASTM D-1743)

Pass
Impact Resistance (AMS-POR)

60+


Heavy Duty and Multi-Purpose Grease

Synthetic Heavy-Duty Grease, NLGI #2, GC/LB (GHD)
Extreme-pressure, moly-fortified. Provides outstanding protection for four wheel drive steering knuckles, spring shackles, heavy equipment pivot joints and other components operating in high-load, low-speed conditions. Offers excellent water washout resistance.

PRODUCT DESCRIPTION
AMSOIL GH Series Heavy Duty EP grease is composed of synthetic base oils and lithium-complex thickeners that provides the film strength, shear resistance, and mechanical stability critical to high load protection. This combination excels in high and low operating temperature ranges by providing excellent oxidation stability, high temperature dropping points and good low temperature torque values and pumping capabilities. AMSOIL Heavy Duty EP Grease is compounded with oxidation and corrosion inhibitors, effective oil soluble EP additives and molybdenum disulfide (moly) solid EP additives for all around protection in severe conditions.

AMSOIL Heavy Duty EP Grease is formulated with a top performing lithium complex thickener system that provides excellent water resistance as identified by the ASTM D-1264 water washout test. AMSOIL Heavy Duty EP Grease adheres to metal and is shear stable during severe mechanical activity, maintaining consistency and providing superior lubrication protection.

PERFORMANCE FEATURES

  • Moly Fortified for added EP protection
  • Adhesive and Shear Stable - prevents squeeze out
  • High dropping point (exceeds 500ºF)
  • Excellent water-washout resistance
  • Oxidation and corrosion inhibited


 

 

PRODUCT DESCRIPTION
AMSOIL Synthetic Multi-Purpose Grease grade #2 is recommended in manual or automatic lubricating systems.

NLGI #2 (GLC) is the preferred choice for medium to high ambient temperatures, sleeve type bushings, high shock loading environments, wet environments and wheel bearings and other automotive applications.

The correct consistency grade of AMSOIL Synthetic Multi-Purpose Grease is recommended in heavy and light duty applications found in manufacturing plants, automobiles, agricultural and construction equipment.

These include, but are not limited to, roller bearings, plain bearings, thrust bearings, gears, electric motors, presses, winches, bushings, wheel bearings, chassis lubrication, universal joints, ball joints, tie-rod ends, and steering knuckles. AMSOIL Synthetic Multi-Purpose Greases are suitable for use up to 350 degrees F. When operating at elevated temperatures, frequent regreasing may be required.

AMSOIL Synthetic Multi-Purpose Greases are compatible with many other types of greases. However, it is recommended that when changing greases, the equipment be cleaned of the old grease when possible or flushed with a liberal amount of Multi-Purpose Grease while the mechanism is in operation. Closely monitor the system for any inconsistencies. Grease compatibility questions should be referred to your AMSOIL representative or AMSOIL Inc.

PERFORMANCE FEATURES

  • High dropping point of 500°F+
  • Resists thermal and oxidation degradation
  • Excellent water-washout resistance
  • Good low temperature pumpability and torque values
  • Adhesive and shear stable to prevent squeeze out

Applications or Requirements

  • GLC (#2) ASTM D-4950 (NLGI) Service GC/LB
  • GLC (#2) Cincinnati Milicron P-64 Spec
  • GLC (#2) Mack MG-C

APPLICATION RECOMMENDATION
AMSOIL GLC Greases grade #2 is recommended for use in manual or automatic lubricating systems. NLGI #2 (GLC) is the preferred choice for medium to high ambient temperatures, sleeve type bushings, high shock loading environments, wet environments. and is the primary choice for wheel bearings.

The correct consistency grade of AMSOIL GL multi-purpose greases are recommended for use in heavy and light duty applications found in manufacturing plants, automotive applications, agricultural equipment and construction equipment. These include, but are not limited to, roller bearings, plain bearings, thrust bearings, gears, electric motors, presses, winches, bushings, wheel bearings. chassis lubrication, universal joints, ball joints, tie-rod ends, and steering knuckles. AMSOIL GL greases are suitable for use up to 350 F When operating at elevated temperatures, frequent regreasing may be required.

AMSOIL GL Lithium Complex Greases are compatible with many other types of greases. However, it is recommended that when changing greases, the equipment be cleaned of the old grease when possible or flushed with a liberal amount of the GL grease while the mechanism is in operation. Closely monitor the system for any inconsistencies. Grease compatibility questions should be referred to your AMSOIL representative or AMSOIL Inc.

 


Independent Amsoil Dealer

Columbus, Ohio
Privacy Statement  |  Terms Of Use
Copyright 2009 by Best Synthetic Oil and Filters